Engine Guards & Sliders

ProTek Front Performance High Way Peg One Step Crash Bar for Harley Touring
- One-Step design
- Made from mild steel
- Fully TIG welded for enhanced strength
- Gloss black powder coat finish
- 33" overall width, 1.25" diameter tube
- Comes with 2 sliders
- Options available for black Delrin, anodized CNC, or anodized CNC with carbon inlay sliders in different colors
- All sliders come with 3/8-16 screws
- Ready to install with all necessary hardware included
- Will Not work with any Touring Models with Rushmore Lower Vent Fairing or Chin spoiler
- Fits Road Glide with Fairing Spoiler Kit
- Will not work with '14-'23 water cooled Touring Bikes
- Please note that installing this crash bar may slightly change your ground clearance. Before hitting the road, please refer to the pictures for ground clearance and leaning angle information.
As low as $389.00

Add to Compare
Chrome ProTek Front Performance High Way Peg One Step Crash Bar for Harley Touring
- One-Step design
- Made from mild steel
- Fully TIG welded for enhanced strength
- Engine Guard Color：Chrome
- 33" overall width, 1.25" diameter tube
- Comes with 2 sliders
- Options available for black Delrin, anodized CNC, or anodized CNC with carbon inlay sliders in different colors
- All sliders come with 3/8-16 screws
- Ready to install with all necessary hardware included
- Will Not work with any Touring Models with Rushmore Lower Vent Fairing or Chin spoiler
- Fits Road Glide with Fairing Spoiler Kit
- Will not work with '14-'23 water cooled Touring Bikes
- Please note that installing this crash bar may slightly change your ground clearance. Before hitting the road, please refer to the pictures for ground clearance and leaning angle information.
As low as $409.00

Add to Compare
ProTek Rear Performance Crash Bar Saddlebags Guards for '14-'25 Harley Touring
- Two-Steps design
- Made from mild steel
- Fully TIG welded for enhanced strength
- Gloss black powder coat finish
- 37" overall width, 1.25" diameter tube
- Comes with 4 sliders
- Options available for black Delrin, anodized CNC, or anodized CNC with carbon inlay sliders in different colors
- All sliders come with 3/8-16 screws
- Ready to install with all necessary hardware included
- Full Kit with Saddlebag Support Bracket
- Will Not work with Advanblack Stretched Side Covers
As low as $459.00

Add to Compare
Chrome ProTek Rear Performance Crash Bar Saddlebags Guards for '14-'25 Harley Touring
- Two-Steps design
- Made from mild steel
- Fully TIG welded for enhanced strength
- Saddlebag Guard Color: Chrome
- 37" overall width, 1.25" diameter tube
- Comes with 4 sliders
- Options available for black Delrin, anodized CNC, or anodized CNC with carbon inlay sliders in different colors
- All sliders come with 3/8-16 screws
- Ready to install with all necessary hardware included
- Full Kit with Saddlebag Support Bracket
- Will Not work with Advanblack Stretched Side Covers
As low as $479.00

Add to Compare
ProTek Front Performance High Way Peg Two Step Crash Bar for Harley Touring
- Two-Steps design
- Made from mild steel
- Fully TIG welded for enhanced strength
- Gloss black powder coat finish
- 33" overall width, 1.25" diameter tube
- Comes with 4 sliders
- Options available for black Delrin, anodized CNC, or anodized CNC with carbon inlay sliders in different colors
- All sliders come with 3/8-16 screws
- Ready to install with all necessary hardware included
- Will Not work with any Touring Models with Rushmore Lower Vent Fairing or Chin spoiler
- Fits Road Glide with Fairing Spoiler Kit
- Please note that installing this crash bar may slightly change your ground clearance. Before hitting the road, please refer to the pictures for ground clearance and leaning angle information.
As low as $459.00

Add to Compare
Chrome ProTek Front Performance High Way Peg Two Step Crash Bar for Harley Touring
- Two-Steps design
- Made from mild steel
- Fully TIG welded for enhanced strength
- Gloss black powder coat finish
- 33" overall width, 1.25" diameter tube
- Comes with 4 sliders
- Options available for black Delrin, anodized CNC, or anodized CNC with carbon inlay sliders in different colors
- All sliders come with 3/8-16 screws
- Ready to install with all necessary hardware included
- Will Not work with any Touring Models with Rushmore Lower Vent Fairing or Chin spoiler
- Fits Road Glide with Fairing Spoiler Kit
- Please note that installing this crash bar may slightly change your ground clearance. Before hitting the road, please refer to the pictures for ground clearance and leaning angle information.
As low as $479.00

Add to Compare
Advanblack ProTek Machined CNC Alumium with Carbon Fiber Inlay Crash Bar Slider
- Bolts right on your Crash Bar
- Replaces Delrin Sliders
- Available on Red, Gold, Black & Silver color
- Come with 3/8-16 screws
- Will fit all flat out & highway 1 1/4" crash bar or saddlebags guards with thread holes
- Comes in a pair
As low as $99.00

Add to Compare
Advanblack ProTek Machined CNC Alumium Crash Bar Slider
- Bolts right on your Crash Bar
- Replaces Delrin Sliders
- Available on Red, Gold, Black & Silver color
- Come with 3/8-16 screws
- Will fit all flat out & highway 1 1/4" crash bar or saddlebags guards with thread holes
- Comes in a pair
As low as $79.00

Add to Compare
IN STOCK
Advanblack ProTek Machined Delrin Crash Bar Slider
- Bolts right on your Crash Bar
- Come with 3/8-16 screws
- Will fit all flat out & highway 1 1/4" crash bar or saddlebags guards with thread holes
- Comes in a pair
$89.00

Add to Compare